Rinnai c199e, Installation And Operation Manual

Page: 51 / 144

C199 Manual 51
Technical Data
Specifications
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
Minimum activation flow is 0.4 GPM (1.5 L/min).
Our products are continually being updated and improved; therefore, specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the
purpose of input adjustment.
C199i C199e
Minimum Gas Consumption Btu/h 15,200
Maximum Gas Consumption Btu/h 199,000 199,000
Hot water capacity (Min - Max) *
0.26 - 9.8 GPM
(1.0 - 32 L/min)
0.26 - 9.8 GPM
(1.0 - 32 L/min)
Temperature Setting (no controller) 120° F (49° C) or 140° F (60° C)
Maximum Temp Setting Selectable at 120° F (49° C), at 140° F (60° C), or at 185° F (85° C)
Minimum Temperature Setting 98° F (37° C)
Weight 61.7 lb (28 kg)
Noise level 41 dB 52 dB
Electrical Data
Normal 75 W 71 W
Standby 2 W
Anti-frost Protection 146 W 168 W
Max Current Without recirculation pump: 4 A
Fuse 10 A
By-Pass Control Electronic
Gas Supply Pressure
Natural Gas 4.0 - 10.5 inch W.C.
Propane 8.0 - 13.5 inch W.C.
Type of Appliance
Condensing, Tankless, Temperature controlled continuous flow gas
hot water system
Connections
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water
Outlet: 3/4" MNPT
Ignition System Direct Electronic Ignition
Electric Connections
Appliance: AC 120 Volts, 60Hz.
Temperature Controller: DC 12 Volts (Digital)
Water Temperature Control Simulation Feed forward and Feedback
Water Supply Pressure
Minimum Water Pressure: 50 PSI (Recommended 60-80 PSI for
maximum performance)
Maximum Water Supply Pressure 150 PSI
Remote Control Cable Non-Polarized Two Core Cable (Minimum 22 AWG)
Energy Star Qualified Yes
Complies with South Coast Air Quality Management District 14 ng/
J or 20 ppm NOx emission levels
Yes