7. Maintenance
7-10 Making changes in Environmental setting 2
141 / 191
4 Press
the
▲
key or
▼
key to select [ON] or
[OFF], then press the TEST/SET key.
The display reverts to the display in step 3.
To continue making settings for other fault codes, repeat steps 3 to 4.
5 Press the MODE key after making the settings.
The display reverts to the [SET-23 CAU OUT] display.
6 Press the MODE key.
The display reverts to the [2-10 SETTING2] display.
7-10-24 Displayed gas name setting (GAS NAME)
Set the gas name displayed on the LCD for each sensor.
Gas names can be up to eight characters in length.
1 In maintenance mode, press the
▲
key or
▼
key to
select [2-10 SETTING2], then press the TEST/SET key.
2 Press
the
▲
key or
▼
key to select [SET-24 GAS NAME],
then press the TEST/SET key.
3 Press
the
▲
key or
▼
key to select the sensor.
Press the
▲
key or
▼
key repeatedly to cycle
through the following settings: [A1]
⇔
[A2]
⇔
[B1]
⇔
[B2].
[----] for the selected sensor blinks.
4 Press the TEST/SET key to confirm the sensor.
Summary of Contents for GD-84D-EX Series
Page 192: ...Revision History Issue Revision details Issue date 0 First issue PT2 3041 12 20 2022 ...
Page 193: ......
Page 194: ......