background image

Family Aqua Condens 3.5 BIS

TM

ENGLISH

3

EN

ENGLISH

INSTALLATION MANUAL

1 -  WARNINGS AND SAFETY

  After removing the packaging, check the integrity and com-

pleteness of the supply and, otherwise, contact the Riello 
Agency that sold the boiler.

 The 

Family Aqua Condens 3.5 BIS boiler must be installed by 

a qualified company in accordance with the regulations in force, 
at the end of the installation process, must issue the owner with 
a declaration of conformity certifying that the installation has 
been performed according to the best working practices and 
in observance of applicable legislation and of the indications 
provided by Riello in the present instructions booklet.

  The installer must instruct the user about the operation of the 

appliance and about essential safety regulations.

  When carrying out routine maintenance, it is always recom-

mended to check the consumption level of the sacrificial an-
ode.

  The boiler must be used for the use planned by Riello for which 

it was designed. Riello declines all contractual and non-con-
tractual liability for injury to persons or animals or damage to 
property deriving from errors made during installation, adjust-
ment and maintenance and from improper use.

  In the event of a water leakage, shut off the water supply and 

promptly contact the Riello Technical Assistance Centre or oth-
er professionally qualified personnel.

  From time to time, check the 

 icon does not light up on the 

display; this symbol indicates an incorrect charge pressure. 
Otherwise, refer to paragraph "Smart system filling".

  Not using the boiler for an extended period of time involves the 

execution of at least the following operations:
-   turn the main appliance switch and the main system switch 

to "off"

-  close the fuel and water taps of the heating system
-   drain the heating and domestic hot water circuits if there is a 

risk of freezing.

  The boiler maintenance must be carried out at least once a 

year.

  This booklet and that of the User are an integral part of the ap-

pliance and therefore should be carefully preserved and should 
always accompany the boiler even when it is sold to another 
owner or user or when transferred to another system. In case 
of loss or damage, please contact your local Riello Technical 
Assistance Service for a new copy.

  The boiler is constructed so as to protect both the user and 

the installer from any accidents. After each intervention on the 
product, pay special attention to the electrical connections, es-
pecially the stripped parts of the wires, which must not protrude 
from the terminal board in any way.

  At the end of its life, the product should be not be disposed of 

as solid urban waste, but rather it should be handed over to a 
differentiated waste collection centre.

  Dispose of all the packaging materials in the suitable contain-

ers at the corresponding collection centres.

  When disposing of waste, be careful not to harm human health 

or employ procedures or methods which may damage the en-
vironment.

Remember that the use of products requiring fuels, electricity and 
water necessitates the respect of certain basic safety rules such as:

  It is forbidden for children and unassisted unskilled people to 

use the boiler.

  It is forbidden to activate electric devices or appliances such as 

switches, household appliances and so on if you notice a smell 
of fuel or unburnt fuel.

  In this case:

-   Ventilate the room by opening the doors and windows
-   Close the fuel shut-off device
-   Promptly call the Riello Technical Assistance Service or pro-

fessionally qualified personnel.

  It is forbidden to touch the boiler while barefoot or if parts of 

your body are wet.

  It is forbidden to carry out any cleaning operations before dis-

connecting the boiler from the electricity supply; to do this, turn 
the main system switch to “OFF”.

  It is forbidden to modify safety and adjustment devices without 

the boiler manufacturer's permission and relative instructions.

  It is forbidden to pull, detach or twist the electric cables that 

emerge from the boiler, even if the boiler itself is disconnected 
from the mains supply.

  It is forbidden to plug or reduce the size of any openings used 

for airing the installation area. 

  It is forbidden to leave flammable containers and substances in 

the room where the boiler is installed.

  It is forbidden to disperse and leave packaging material within 

children's reach as it may be a potential source of hazard.

  It is forbidden to obstruct the condensate outlet.

2 -  DESCRIPTION

Family Aqua Condens 3.5 BIS is a wall-hung condensing boiler, 
with premix burner and low emission of pollutants for heating and for 
the production of DHW use and has a 60 litres steel storage tank.
This is an electronically controlled boilers with automatic ignition, ion-
isation flame check and with proportional control system of the gas 
and air flows, both in heating and DHW.
It uses an aluminium alloy boiler body, has a sealed combustion 
chamber and, based on the gas discharge accessory used, is clas-
sified in categories B23P, B53P, C13-C13x, C23, C33-C33x, C43-
C43x, C53-C53x, C83-C83xC93C93x. The switching of the heating 
and DHW modes is performed via a three-way electric valve which 
set on DHW when in the rest position. To guarantee the correct water 
output in the exchanger, the boiler is equipped with an automatic 
by-pass.
it is also equipped with:
-  Circulator with variable speed (PWM= Pulse-Width Modulation)
-  Modulation 1-10, the boiler can automatically modulate the output 

power in a maximum and minimum range (see technical data)

-  Range Rated - this means the boiler is equipped with a device that 

adapts it to the heat requirements of the system, so the boiler out-
put can be adjusted according to the energy needs of the building 

-  Semi-automatic heating system filling device
-  Microprocessor management and control with self-diagnostics dis-

played by means of a display

-  Circulator anti-blocking
-  First-level antifreeze (suitable for indoor installations)
-  Premix combustion system which ensures a constant air-gas ratio
-  Ambient thermostat or programmable timer or local valve prear-

rangement.

-  external probe that enables the climate control function
-  Prepared for limit thermostat on reduced temperature systems
-  Anti-legionella: Legionella is a disease that can be contracted by 

inhaling small droplets of water (aerosols) which contain the Le-

Summary of Contents for FAMILY AQUA CONDENS 3.5 BIS





































































Reviews: