Family Aqua Condens 3.5 BIS
24
ENGLISH
25
Once fault 40 has been reset, the boiler performs an automatic vent-
ing cycle that lasts about 2 minutes, and the display simultaneously
visualises: 43 and
.
Press the
key to interrupt the automatic bleed cycle.
At the end of the filling procedure, the full drop icon will appear for a
few moments and then switch off.
L - InFO
When you press the key, the word InFO will appear on the display.
Rotate the encoder A to view - in sequence - the information de-
scribed below.
If the key is not pressed, after 10 seconds the system automatically
quits this function.
M - InFO list
Info 1
Displays the outdoor temperature measured by the external probe,
only if an external probe is connected
Info 2
Displays the system pressure value.
Info 3
Displays the set heating temperature.
Info 4
Displays the set domestic water temperature (storage tank with
probe only).
Info 5
Displays the set heating temperature on the second circuit (only with
second circuit connected).
N - Display and fault codes
After positioning the main system switch “ON”, if the boiler does not
start up this means there is no electricity supply.
Check that:
- the power supply plug of the appliance, if present, is correctly in-
serted
- the main system switch is positioned on “ON”
If the switch-on operation is still unsuccessful, contact the Riel-
lo Technical Assistance Centre.
