20
INSTALLATION
2
INSTALLATION
2.1
Preliminary installation measures
1
2
3
4
2 modules
3 modules
To correctly install the modules, the installer must take into consideration a series of tolerances on the installation distances as
established during the design stage.
In particular:
1
the plates for securing the frames have slots and must only be secured after having fitted the manifolds.
2 if making connections between manifolds, tighten the flange to ensure that the seal adheres and reduce the clearance on
the total length of the manifolds.
3 the thermal module can slide (right-left) on the supporting bracket to facilitate any adjustments which need to be made
during the installation stage of the hydraulic ramps.
4 in the case of installations with a manifold for 3 modules, the central frame has a greater tolerance.
Summary of Contents for Condexa PRO 100
Page 32: ...32 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 7 7 8...
Page 33: ...33 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
Page 36: ...36 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 8 8 7...
Page 37: ...37 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
