38
INSTALLATION
2.6
Positioning the CONDENSATE OUTLET
Assembly of the condensate outlet. Components included in code 20131267
The figure refers to an installation with 2 modules in line or 3/4 modules B2B.
1
Make a siphon using the outlet pipe and secure it using cable ties (not supplied).
2
Connect the pipes to the other thermal modules working in the same way as described for the first.
1
2
≥ 350mm
Safety valve drain
Pipe collar
Pipe collar
9
With thermal modules in BACK TO BACK configuration, use the dedicated coupling points.
9
Correctly position the plugs on the coupling points which are not used.
9
The coupling points which are not used can be used for the relief valve outlet
Summary of Contents for Condexa PRO 100
Page 32: ...32 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 7 7 8...
Page 33: ...33 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
Page 36: ...36 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 8 8 7...
Page 37: ...37 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
