46
INSTALLATION
2.9
Positioning the SAFETY SECTION AND SEPARATOR
Assembly of the safety separator and separator. Components included in code 20070910 - 20070912 - 20132873 - 20070699 -
20070701 - 20070702 - 20132874 - 20070703 - 20070704 - 20070705 - 20071190 - 20023104 - 20023106 - 20009486 - 20009482 -
20009483 - 20061640
1
Install and seal the selected return unit at the return manifold.
2
Install and seal the selected return unit at the separator. Installing the primary pump (if present).
3
Install and seal the selected INAIL section at the delivery manifold.
4
Install and seal the selected INAIL section at the separator.
Proceed to install the safety elements contained in the specific kit.
1
2
3
4
9
In the case of thermal modules in cascade
exceeding 5 meters in length, the fuel must be
introduced on the same side as the separator.
This allows correct installation of the capillary of
the fuel shut-off valve (available as an acces-
sory)
Once all the hydraulic connections have been made, the tightness test of the system can be carried out and the insulation parts
can be fitted to complete the system.
9
Follow the safety and system filling procedures as indicated in the user manual of the individual appliances
Condexa PRO
.
Summary of Contents for Condexa PRO 100
Page 32: ...32 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 7 7 8...
Page 33: ...33 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
Page 36: ...36 INSTALLATION 7 Position the GAS manifold 8 Secure the GAS manifold to the frame 8 8 7...
Page 37: ...37 INSTALLATION 9 Position the manifold closing plugs from the required side 9 22mm 51mm...
