Riello 20155654, Installation, Use And Maintenance Instructions

Page: 47 / 84

45 20155699 GB
Operating control and display
Activate pilot burner in gas operation
Use cursor keys to select menu and press ENTER
to confirm.
Change functional state ON/OFF using cursor keys and
press ENTER to confirm.
The display shows the menu: 'pilot burner in gas operation'.
1 Pilot burner in gas operation pictogram
2 Activate the pilot burner in gas operation
3 Press ENTER to accept settings
NOTE:
you require access level 2 to make settings in this function!
Accept or discard the entry!
Set pilot burner in oil operation
Use cursor keys to select menu and press ENTER
to confirm.
Change functional state ON/OFF using the cursor keys
and press ENTER
to confirm.
The display shows the menu: pilot burner in oil operation.
1 Pilot burner in oil operation pictogram
2 Activate pilot burner in oil operation
3 Press ENTER to accept settings
NOTE:
you require access level 2 to make settings in this function!
Accept or discard the entry!
Configuration of actuating outputs
Use cursor keys to select menu and press ENTER
to confirm.
The display shows the configuration of actuating outputs menu.
1 Actuator position pictogram
2 Display channel 1, oil
3 Display channel 2, air
4 Channel active
5 Display channel 3, off
6 Optional channel, off
Curve setting of actuators
Use cursor keys to select menu and press ENTER
to confirm.
NOTE:
pressing key
and holding it longer than 2 s in this menu
will cause a fault shut-down.
The display shows the curve setting menu.
1 Ignition position firing rate point
2 set-point channel 1, oil
3 Actual value channel 1, oil
4 set-point channel 2, air
5 Actual value channel 2, air
6 set-point channel 3, oil
7 Actual value channel 3, oil
8 Curve data for this firing rate point already existing
Fig. 68
S9403
Fig. 69
S9406
Fig. 70
S9408
Fig. 71
S9409