Riello 20155654, Installation, Use And Maintenance Instructions

Page: 45 / 84

43 20155699 GB
Operating control and display
NOTE:
the following sequence of events for confirming or discard-
ing the entry is exactly the same for all parameter entries.
Therefore this process is not illustrated again in following
explanations of parameter settings.
You will simply find this text: 'Accept or discard the entry!'
You will simply find this text: Accept or discard the entry!
– Confirm the change
Press ENTER in time to confirm.
The value is accepted.
The display shows the following page.
1 Pictogram UI300
2 Pictogram BT300
3 Parameter number UI300
4 Parameter number BT300
5 Pictogram discard parameters
6 Value BT300
7 Value UI300
The parameter change is transferred to the burner control sys-
tem!
– Cancel parameter changes:
Select the Back key
The change made to the parameter is not accepted. The follow-
ing page appears.
1 Pictogram UI300
2 Pictogram BT300
3 Parameter number UI300
4 Parameter number BT300
5 Pictogram apply parameters
6 Value BT300
7 Value UI300
Set duration of post-purge
Use cursor keys to select menu and press ENTER
to confirm.
The display shows the post-purge period menu.
1 Post-purge period pictogram
2 Setting post-purge time
3 Press ENTER to accept setting
Use cursor keys to select number you wish to change.
Change the numerical value with cursor keys .
Confirm entry with ENTER .
Accept or discard the entry!
WARNING
If both values are identical you apply the value by
pressing ENTER.
In case of a discrepancy of values terminate the
storage process.
Fig. 61
S9390
Fig. 62
S9391
Fig. 63
S9394