Riello 20155654, Installation, Use And Maintenance Instructions

Page: 37 / 84

35 20155699 GB
Operating control and display
7.1 UI300 user interface
Display
The display shows in pictogram:
–
the menu structure
– operating status
– parameters
– error messages
Back key
Cursor keys
ENTER keys
7.2 Menu functions
The menu is divided into five paths:
INFO
MANUAL
SETTINGS
PASSWORD
DATA PROCESSING
7 Operating control and display
Jump to previous window
Fig. 33
S9620
You navigate in the menu using cursor keys.
You use “left” and “right” keys to move step
by step in a selected row.
At the end of the selected row the cursor
jumps down to the next row, if possible.
In a multiline menu use “up” and “down” keys
to switch to other rows.
To display parameters, switch between vari-
ous fields.
Press ENTER to call up a menu on the start screen.
Select a sub-menu in the menu window. Transfer set-
ting values by pressing ENTER key in a parameter
window.
Use a flushing, red ENTER key to release a fault inter-
locker.
If the ENTER key is permanently lit red, a fault with an
automatic restart is displayed.
INFO
MANUAL
SETTINGS
PASSWORD
DATA PROCESSING
Select INFO path for information about the following:
–
burner
– faults/fault history
– software version
– display of check sums
– serial number
– actuator positions (current damper position for each
channel)
– digital inputs/outputs
Select MANUAL to:
–
start and stop burner by hand
– adjust internal burner firing rate
Select the SETTINGS path for getting information/make
changes to:
–
password
– burner settings (display and settings)
– actuator elements settings (display)
– air/fuel control system
– deletion of curve sets
– display settings
Use PASSWORD to:
–
for enter a password
– to change the access level
Use DATA PROCESSING to:
–
read out datasets from the BT300
– to transfer datasets to the BT300