5010e_513.doc / 22.01.10
Hint
Hint: If the device is maladjusted, this function can directly be called during the switching on routine:
Keep the touchscreen pressed during switching on. After some seconds a deep signal tone sounds and the text
message “TOUCH PANEL ADJUSTMENT” will be shown at the first line of the greeting screen. Release the
touchscreen within one second. Execute the adjustment of the touchscreen as described above. You must
choose your Photometer type (4040 or 5010) after the touchpanel adjustment is completed.
Select Photometer:
This dialog will be only displayed when the
touchscreen adjustment has been entered
during switching on the Photometer.
The Photometer type in use must be selected:
4040 or 5010.
S E L E C T P H O T O M E T E R
4 0 4 0 5 0 1 0
7.2.16 Date / Time
The current status of the date/time display is
indicated in the first line by OFF or ON.
Change setting by [SELECT].
With activation of the clock date and time can
be changed by [OK]. Each entry of day,
month, year, minute and second must be
confirmed by [E].
If a value is to be changed, then all
values are to be entered again!
D A T E / T I M E O N
E X I T O K S E L E C T
D A T E T I M E
m m / d d / y y h h : m m : s s
0 9 / 0 8 / 0 9 1 5 : 3 5 : 0 0
1 2 3 4 5 6 7 8
E S C 9 0 . + - E
7.2.17 Language
The current status of the language is indicated
in the first line.
The setting can be changed by [SELECT]
Following options are possible:
•
LANGUAGE : ENGLISH
•
LANGUAGE : GERMAN
Save setting permanently by [OK].
The setting is temporarily saved up to next
switch-off of the device by [END].
L A N G U A G E : E N G L I S H
E X I T O K S E L E C T
ROBERT RIELE GmbH & Co KG
Page 60
7- UTILITY PROGRAMS
Y PROGRAMS
