5010e_513.doc / 22.01.10
44
error at pump calibration
- pump tube not clamped;
- no liquid aspirated;
- too much liquid aspirated during calibrating;
- power of the pump too small;
- motor does not rotate or stops;
- connectors of tubes leaky;
- bubble detector works falsely;
- aspiration tube blocked;
- aspiration tube badly stained
- clamp pump tube;
- control volume of aspiration;
- control connectors of tubes;
- the plug of the bubble detector has a bad
contact;
- the cable of the bubble detector has a
bad contact;
- adjust bubble detector (chapter 7.2.4);
- replace aspiration tube (chapter 8.7)
45
error at sipping solution
- pump tube not clamped;
- no liquid aspirated;
- power of the pump too small;
- motor does not rotate or stops;
- connectors of tubes leaky;
- bubble detector works falsely;
- aspiration tube blocked;
- aspiration tube badly stained
- clamp pump tube;
- adjust bubble detector (chapter 7.2.4);
- control volume of aspiration;
- control connectors of tubes;
- do a calibration of peristaltic pump
(chapter 7.2.4);
- the plug of the bubble detector has a bad
contact;
- the cable of the bubble detector has a
bad contact;
- replace aspiration tube (chapter 8.7)
46
filter position out of tolerance
47
+ 12 V
DC
out of range
contact service partner
51
Wrong adaptor
Insert standard cuvette adaptor
(chapter3.5.1)
52
timeout printer internal
the internal printer is temporarily discon-
nected
53
Set of data points is missing
Check multi-standard functions
54
nonlinear measurement: value out of range
check the absorbance of the sample
55
number of given data points < 2
add data points
57
memory of data logging management is completely filled
delete log data (chapter 7.2.8)
58
checksum of data logging damaged
delete log data (chapter 7.2.8)
59
error in the automatic measuring operation (remote)
check interface
60
error at multiplexer of operational amplifier
contact service partner
61
error at multiplexer of bubble detector
contact service partner
62
free method number not found
check method memory
63
wrong address at multi-standard loading
check multi-standards
64
current method not found in monthly memory
check QC data of method
65
more than 50 QC methods defined
delete unused QC methods
66
internal clock is off. QC data not storable
switch on internal clock
67
BCC error in dataset of QC method values
check current method
68
free monthly memory not found at QC
delete unused QC methods
69
free space in daily memory not found at QC
empty QC daily memory
70
error at QC calculation
check QC data
71
QC serum not found
check QC data
72
wrong address at saving test results
send results through serial interface and
delete results (chapter 7.2.19)
73
results memory full, it will be overwritten
overwrite results memory or send and
delete results (chapter 7.2.19)
74
BCC error at sending result string
send results through serial interface and
delete results (chapter 7.2.19)
ROBERT RIELE GmbH & Co KG
Page 66
9 - ERROR MESSAGE / CORRECTION
