Note Before First Use
34
Rieber GmbH & Co. KG
7.8
K|POT
®
1/1 hybrid-SP-i
Example
Lengthwise /front installation
X
Main switch (ON/OFF switch)
1
+
–
buttons
for adjusting the set point
temperature. To do this, keep the SET
button (2) pressed simultaneously.
2
SET button
. When the SET button is
pressed, the set point temperature
appears in the display (6). When the SET
button is pressed, you can
increase or
decrease the set point temperature
with
the +
– buttons (1).
3
Program selector button for keep-warm
operating mode
. The illuminating control
indicator (7) indicates the current
operating mode. Press this button to
select keep-warm operating mode.
4
Program selector button for keep-warm
operating mode
. The illuminating control
indicator (7) indicates the current
operating mode. Press this button to
select keep-cold operating mode.
5
ON/OFF button
for switching on and
off. When the unit is switched on,
information appears in the display (6)
as well as one of the control indicators
(7).
6
Display
. The actual temperature on
the GN 1/1 surface is displayed. When
the SET button is pressed, the set
point temperature appears.
7
Control indicators for the operating
modes
keep-cold and keep-warm
8
Stainless steel GN 1/1 surface with
integrated cooling channels, active
cooling, flush with the stainless steel
casing
9
Power cable with connecting plug
