Rieber 1/1-CH-800 Manual Download Page 11

Page: 11 / 40

General Safety Instructions

Rieber GmbH & Co. KG

3.3.5

Risks due to electricity

WARNING

Danger of electric shock. Water penetration increases the risk of an electric shock.

►

Never direct a water jet onto the device.

►

Protect the appliance from moisture.

Risks arising from damaged Ceran

glass surface

WARNING

Danger of electric shock from damaged Ceran

glass surface.

►

Avoid electrically conductive materials in the immediate vicinity, for example metal

splash guard.

►

If the Ceran

glass surface is damaged, if it is cracked, for example, disconnect the

appliance from the mains supply immediately.

ATTENTION

Improper handling and impacts can damage the Ceran

glass surface.

►

NEVER

place a hot pot on the cold Ceran

glass surface or a cold pot on a hot Ceran

glass surface, otherwise the Ceran

glass surface may crack due to thermal stresses.

►

Do not place inappropriately large or heavy pots or objects on the appliance. Avoid

falling objects.

►

Even seemingly light objects, like a salt cellar, can cause cracks or breaks in the worst

case scenario. Prevent objects from falling onto the Ceran

glass surface.

►

Materials such as plastic, aluminium foil or sugar can cause cracks or breaks as well

as incrustations and adhesions on the hot Ceran

glass surface. Switch the heating

mechanism off and scrape off the residues with a glass scraper, while the heating
surface is still warm.

3.3.6

Danger of cuts from damaged Ceran

glass surface

WARNING

Danger of cuts from damaged Ceran

glass surface. Sharp and pointed edges can cause

cuts.

►

If the Ceran

glass surface is damaged, disconnect the appliance from the mains

supply immediately.

Summary of Contents for 1/1-CH-800









































Search results

Summary of Contents for 1/1-CH-800

Reviews:

Related manuals for 1/1-CH-800

Brands by name

Popular brands

Rieber 1/1-CH-800, Manual

Search results

Summary of Contents for 1/1-CH-800

Reviews:

Related manuals for 1/1-CH-800

Brands by name

Popular brands