Rieber 1/1-CH-800 Manual Download Page 10

Page: 10 / 40

General Safety Instructions

Rieber GmbH & Co. KG

3.3.2

Risk of fire

WARNING

Risk of fire.

►

Observe a minimum distance of 20 cm from walls.

►

If there is a fire risk, cover the surface and wall with non-flammable, heat-insulating

material.

►

Observe local fire protection measures.

3.3.3

Dangers due to unexpected heating of objects as a result of induction

WARNING

Risk of burns when wearing metal parts on the body in close proximity to an induction
appliance close to the surface of the cooking area.

►

Do not wear watches, rings or metal objects.

►

Do not place metal objects such as cutlery, tins or jewellery on the hob within the

cooking zone.

ATTENTION

Substantial damage is possible to magnetically-sensitive objects in close proximity to an
induction appliance.

►

Keep magnetically-sensitive objects such as credit cards, phone cards, cassettes and

watches away from the area immediately around an induction appliance.

3.3.4

Danger for persons with pacemakers due to induction

WARNING

For persons with a pacemaker: When handling an induction appliance, the electromagnetic
radiation may cause malfunction or interference.

We recommend that the operator takes the following precautions:

►

Keep persons with a pacemaker away from the appliance initially. Identify this

workplace where necessary.

►

Have the doctor clarify the actual situation and individual compatibility where

necessary.

Summary of Contents for 1/1-CH-800









































Search results

Summary of Contents for 1/1-CH-800

Reviews:

Related manuals for 1/1-CH-800

Brands by name

Popular brands

Rieber 1/1-CH-800, Manual

Search results

Summary of Contents for 1/1-CH-800

Reviews:

Related manuals for 1/1-CH-800

Brands by name

Popular brands