Note Before First Use
Rieber GmbH & Co. KG
31
7.6.2
Overview of functions
Overview of functions
K|POT
®
1/1-ik-3600-2Z
K|POT
®
1/1-ik-3600-2Z built-in
Pot detection
X
Power settings
X
Melting and keep-warm function
X
Automatic preheating
X
Boost function
X
Bridging function
X
Automatic shut-off (operating time
limitation)
X
7.6.3
Pot detection (induction)
•
The heat setting of a cooking zone can be selected without any cookware present.
•
The power is generally only released by the control when suitable cookware is detected on
the cooking zone. Make sure that you use suitable cookware.
•
If no pot is detected,
the appliance control
switches the cooking zone off
after
10 minutes
. The cooking zone can only be switched on again when the power regulator
has been turned back to the "0" position.
•
Minimum pot diameter:
120 mm
7.6.4
Power settings
•
Power settings 1 to 9 enable any type of food preparation, from gently keeping warm and
regeneration to grilling.
7.6.5
Melting and keep-warm function
# Melting function
The purpose
of the melting function is to regulate the
base of the pot to give a temperature of
around 45 °C /42 °C in the pot
. This allows food to be melted in an energy-optimised manner.
•
The melting function is
setting 1
, which is reached by turning the power regulator to the
right from the zero position.
•
The maximum period of time is
limited to 2 hours
. Switches to OFF automatically.
# Keep-warm function
The purpose
of the keep-warm function is to regulate the
base of the pot to give a temperature of
around 70 °C /65 °C in the pot
. This allows food to be kept warm in an energy-optimised manner or
gently warmed.
•
The keep-warm function is
setting 2
, which is reached by turning the power regulator to the
right from the zero position.
•
The maximum period of time is
limited to 2 hours
. Switches to OFF automatically.
