50
This example image shows a graph of trickle
charging a 12 Volt lead-acid car battery.
The
’s setting ‘
’ was set to 1 hour and the external
temperature sensor was placed under the
RD60xx enclosure.
After 1 hour, the charging ceased with 6.64
Watt-hours of energy being transferred.
The battery symbol on the bottom line shows
that the RD60xx was used in Battery Mode.
The white TIME, with red background, is the
reason why the charging cycle stopped.
Switch to Autoscaling (Y-Axis):
“
MEM
” + Press/Click “
ENCODER
”
Pause/Play:
“
ENTER
”
Select parameter to scale:
“
ENCODER
”
Change Offset Y :
“
▲
” or “
▼
”
Reset Offset Y:
“
MEM
” + (“
▲
”
or
“
▼
”)
- Graph (View) mode Only
{Todo: Integrate below into this section}
Repeatedly pressing the auto-scaling combo cycles through:
voltage
current
power
external temperature
auto-scaling
If it is in one of the first four then the "D" (for division) is in white with a red background. When it
is in auto-scaling mode the "D" has the default background.
Organise View mode specific commands better
