Riden RD60 Series, Manual

Page: 42 / 77

42
Timer Mode {CS Menu}
OFF Output Timer is NOT enabled.
Single Output ON/OFF will go through ‘ Timer Off ’ and ‘ Timer On ’ once.
Cyclic Output ON/OFF continuously cycles through ‘ Timer Off ’ and ‘ Timer On ’,
IF ‘ Timer Off ’ is set to
00 00 00
, Timer Mode will not do anything.
IF set to Single , will need to be re-enable after each use.
Notes:
Timers start when the
“
ON/OFF
”
Button is pressed, unless ‘ Timer Reset ’ is
enabled.
Changing the ‘Timer Mode’ settings while the output is ON may result in
unexpected behaviour.
Setting is automatically disabled on power-down.
Timer Off {CS Menu}
Settable Range:
00 00 00 - 99 59 59
(Hours, Minutes, Seconds)
IF Set to
00 00 00
, ‘ Timer Mode ’ will not activate.
IF Timer Mode active:
When value reaches
00 00 00
, output will turn OFF.
IF ‘ Timer On ’ is set to
00 00 00
,
When ‘ Timer Off ’ expires:
Output will turn OFF.
The
Normal Operating Mode indicator is replaced by a white on red
background ‘TIME’ icon.
Timer On {CS Menu}
Settable Range:
00 00 00 - 99 59 59
(Hours, Minutes, Seconds)
IF Timer Mode active:
After ‘ Timer Off ’ expires and the output is turned OFF.
‘Timer On’ will then start counting down.
When ‘Timer On’ expires, the output will turn back ON.