Ricoh SP C260SFNw, User Manual, Page: 350 / 444

Message Causes Solutions
Replacement
Required:
Fusing Unit The fusing unit is no longer
usable, and must be replaced. Contact your sales or service
representative.
Replacement
Required:
Paper Feed Roller The paper feed roller is no
longer usable, and must be
replaced. Contact your sales or service
representative.
Replacement
Required:
Toner Cartridge (X) The machine has run out of
toner. Replace the print cartridge. See page 315
"Replacing the Print Cartridge".
Replacement
Required:
Transfer Roller The transfer roller is no longer
usable, and must be replaced. Contact your sales or service
representative.
RX Communication
Error A reception error occurred, and
the fax could not be received
correctly. If possible, contact the sender of the fax
and ask them to resend it.
Scan (NW)
Disconnected A scanned file could not be sent
because the Ethernet cable was
not connected properly. Reconnect the Ethernet cable properly,
and then try the operation again.
Scan (USB)
Disconnected The USB cable was
disconnected while scanning
from a computer. Reconnect the USB cable properly, and
then try the operation again.
Server Connection
Failed A scanned file could not be sent
because the destination could
not be reached. Confirm that the destination is registered
correctly, and then try the operation again.
Server Response
Error An error occurred in
communication with the server
before beginning transmission. Confirm that the destination is registered
correctly, and then try the operation again.
If the problem could not be solved, contact
the network administrator.
SCXXX A fatal hardware error has
occurred, and the machine
cannot function. Contact your sales or service
representative.
10. Troubleshooting
348