Ricoh SP C260SFNw, User Manual, Page: 349 / 444

Message Causes Solutions
Network is not Ready A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
On Hook or Stop key The machine has been off-hook
for an extended period of time.
Put down the handset phone or press the
[Clear/Stop] key.
Open Front Cover
then move Envelope
Lever up/down. The fusing unit levers are not
positioned correctly. The machine can start printing only if the
fusing unit levers are in the correct
positions for the paper type.
• To print on an envelope, open the
front cover, and then lower the left
and right levers to the envelope mark.
• To print on paper, open the front
cover, and then raise the left and right
levers to the plain paper mark.
Out of Paper: X The indicated tray has run out of
paper. Load paper to the indicated tray. See
page 48 "Loading Paper".
Please Restart
Machine The machine needs to be
restarted. Turn off the power, and then turn it back
on.
Remove Paper:
Bypass Tray The machine failed to proceed
with the print job, because tray
1 or Tray 2 was specified as the
input tray but paper was set in
the bypass tray. Remove paper from the bypass tray.
Replace Intermediate
Transfer Belt The transfer belt is no longer
usable, and must be replaced. Contact your sales or service
representative.
Replace Required
Soon:
Toner Cartridge (X) The print cartridge is almost
empty. Prepare a new print cartridge.
Replace Required
Soon:
Waste Toner Bottle The waste toner bottle needs to
be replaced soon. Prepare a new waste toner bottle.
Error and Status Messages on the Screen
347