Ricoh SP 6330N, Service Manual

Page: 179 / 286

SP Tables
SM Appendix 3-17 M047
Appendix: SP
Mode T
ables
2301
Trans Current
Adjusts the correction current applied to the transfer roller.
2301 1
Trans (1)
[-5 to 5 / 0 / 1 A/step]
Adjusts the correction value for the transfer current in 120.8 mm/sec line
speed.
2301 2
Trans (2)
[-5 to 5 / 0 / 1 A/step]
Adjusts the correction value for the transfer current in 161.4 mm/sec line
speed.
2910
Thermistor Adjust 0: Yes , 1: No DFU
If this is "Yes", the machine automatically adjusts the charge roller voltage
and transfer current in response to the temperature within the machine.
2911 PreRotate Time
2911 2
Curl Reduction [0 to 40 / 20 / 5 sec/step]
Specifies the pre-rotation time at power-on or recovery from the energy
saver mode.
2911 3
LowTemp PreRotate [0 to 40 / 20 / 5 sec/step]
Specifies the pre-rotation time at power-on or recovery from the energy
saver mode in low temperature environment (less than -15°C).
2980
Waste Toner Count
Displays the waste toner counter in the engine board.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA