Ricoh SP 6330N, Service Manual

Page: 235 / 286

SP Tables
SM Appendix 3-73 M047
Appendix: SP
Mode T
ables
5907
Plug & Play
Sets the brand name and the production name for Windows Plug & Play.
This information is stored in NVRAM. If the NVRAM is defective or has been
replaced, these names should be registered again.
To set the plug and play model name, enter the model number, and then
press .
5924 SDK Apli Display
001
Selects the display mode for SDK application.
[0 or 1 / 0 / -]
0: Not displayed
1: Displayed
5930 Meter Click Charge
5930 001
Setting
Switches the meter-click charge mode on and off.
[ 0: No ], [1: Yes]
Important : Turn the main switch off/on after changing this setting.
No: Meter charge mode disabled (default). This setting is for machines were
the operator is responsible for replacing the AIO and the Maintenance Kit.
ƒ Alert messages are displayed on the operation panel when the AIO or
PM parts reach the limit of their yield.
ƒ The PM counter resets automatically after the user replaces the fusing
unit.
Yes: Meter charge mode enabled. This setting is for machines where the
service technician has responsibility for servicing the machine.
ƒ Alert messages are not displayed when the AIO or PM parts reach the
limits of their yield.
ƒ Pressing the [Menu] button displays the meter charge count.
ƒ The service technician must reset the PM counter after completing
machine maintenance.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA