Ricoh SP 6330N, Service Manual

Page: 105 / 286

Service Program Mode
M047 5-1 SM
System
Maintenance
Refere
nce
5. SYSTEM MAINTENANCE REFERENCE
5.1 SERVICE PROGRAM MODE
5.1.1 SP TABLES
See "Appendices" for the following information:
ƒ Printer Controller Service Mode Tables
ƒ Engine Mode Tables
Before accessing the service menu, do the following:
ƒ Confirm that there is no print data in the printer buffer (the Data In LED must not be
lit or blinking).
ƒ If there is some data in the buffer, wait until all data has been printed.
5.1.2 INPUTTING A VALUE OR SETTING FOR A SERVICE
PROGRAM
Enter the required program mode as explained above. The setting appearing on the display
is the current setting.
Select the required setting using the "Up/Down arrow" keys [A], then press the "OK" key [B].
The previous value remains if the "OK" key [B] is not pressed.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA