Ricoh SP 6330N, Service Manual

Page: 167 / 286

SP Tables
SM Appendix 3-5 M047
Appendix: SP
Mode T
ables
If enabled, the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing 0: Disable
1: Enable
(Duplex)
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex
job, are not routed through the duplex unit. This could result in problems
with letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
1001 Bit Switch
006 Bit Switch 6 0 1
bit 0
to 5
DFU - -
bit 6
PDL Auto Detection timeout of jobs
submitted via USB or Parallel Port
(IEEE 1284).
0: Disable
(Immediately)
1: Enable
(10
seconds)
To be used if PDL auto-detection fails. A failure of PDL autodetection
doesn't necessarily mean that the job can't be printed. This bit switch tells
the device whether to time-out immediately (default) upon failure or to wait
10 seconds.
bit 7 DFU - -
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA