Ricoh SP 6330N, Service Manual

Page: 232 / 286

SP Tables
M047 3-70 SM Appendix
5870
Common KeyInfo Writing
Writes to flash ROM the common proof for validating the device for
@Remote specifications.
Note:
ƒ These SP settings are required to connect @Remote or must also be
set after the board is replaced.
ƒ Even if @Remote is not connected, these settings are used for Web
validation, so at least SP5870 003 must be enabled.
5870 001 Writing Writes the authentication data (used for NRS) in the memory.
5870 003 Initialize Initializes the authentication data in the memory.
5873
SDCardAppliMove
Allows you to move applications from one SD card another. For more,
please refer to the "SD Card Application Move" section.
5873 001 MoveExec Executes the move from one SD card to another.
5873 002 UndoExec This is an undo function. It cancels the previous execution.
5878
Option Setup
001 Data Overwrite Security
Press [Execute] to initialize the Data Overwrite
Security option for the printer. For more, see
"DataOverwriteSecurity Unit" in the chapter
"Installation".
002 HDD Encryption
Press [Execute] to initialize the HDD Encryption
option for the printer. For more, see "HDD
Encryption" in the chapter "Installation".
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA