manualshive.com logo in svg

Ricoh SP 220SFNw, User Manual, Page: 13 / 100

Share
Download
Ricoh SP 220SFNw User Manual Download Page 13

How to Read This Manual

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.

Symbols Used in This Manual

This manual uses the following symbols:

Indicates points to pay attention to when using the machine, and explanations of likely causes of paper
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.

Indicates supplementary explanations of the machine’s functions, and instructions on resolving user
errors.

[ ]

Indicates the names of keys on the machine's display or control panels.

Model-Specific Information

This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.

MF

DCT065

12

opal-p3_mf3_com_user_guide_gb_00228414_eng.xml

Summary of Contents for SP 220SFNw





































































































Reviews:

No comments