manualshive.com logo in svg

Ricoh Pro C720s, Operating Instructions Manual

Share
Download
Ricoh Pro C720s Operating Instructions Manual Download Page 15

1. Connecting the Machine

This chapter describes how to connect the machine to the network and specify the network settings.

Connecting to the Interfaces

This section explains how to identify the machine's interface and connect the machine according to the
network environment.

• A network interface cable with a ferrite core must be used for RF interference suppression.

BJM101S

1. USB2.0 port

Port for connecting the authentication equipment (optional).

2. Ethernet port

Port for using the 100BASE-TX, or 10BASE-T cable.

Connecting to the Ethernet Interface

This section describes how to connect Ethernet interface cable to the Ethernet interface.

• If the main power switch is on, turn it off.
• Use the following Ethernet cables.

• When using 100BASE-TX/10BASE-T.

Unshielded Twisted Pair Cable (UTP) or Shielded Twisted Pair Cable (STP) and Category type
5 or more

1.

Make sure the main power switch of the machine is off.

13

1

Summary of Contents for Pro C720s





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands