Ricoh Pro C720s Operating Instructions Manual Download

Page: 122 / 212

Authentication Information

Following describes the procedure for authenticating a user code.

• The functions associated with each user code are the same. If you change or delete user codes,

management data and limits associated with that code become invalid.

• Copier
• Document Server
• Printer
• Scanner

• You can register up to 500 user codes.
• The number of copies scanned using the scanner function is counted for each user code. This allows

you to check each user's usage.

• To automatically register the printer driver user code, select [PC Control] under Printer for the printer

in User Code Authentication. To use the user code set in User Tools, set the user codes registered in
User Tools for the printer driver.

• For details about setting user codes for the printer driver, see the printer driver Help.

• p.49 "Administrator Tools"

Registering a User Code

This section describes how to register a user code.

Press [System Settings].

6. Registering Addresses and Users for Scanner Functions

120

Summary of Contents for Pro C720s





















































































































































































































Search results

Summary of Contents for Pro C720s

Reviews:

Related manuals for Pro C720s

Brands by name

Popular brands

Ricoh Pro C720s, Operating Instructions Manual

Search results

Summary of Contents for Pro C720s

Reviews:

Related manuals for Pro C720s

Brands by name

Popular brands