Ricoh Priport JP8000, Operating Instructions Manual

Page: 144 / 464

Optional Functions
124
2
The first 8mm, 0.32", of the leading
edge and the last 2mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 8mm, 0.32", and the trailing edge
margin is at least 2mm, 0.08".
Do not stack originals above the limit
mark.
Placing Originals in the
Document Feeder
A
Adjust the guide to the original
size.
B
Insert the aligned originals face
up into the document feeder.
Limitation
❒
Approximately 50 originals
(80g/m
2
, 21 lb) can be inserted
at one time in the document
feeder. The first (top) original
will be fed first.
Note
❒
To avoid a multi-sheet feed,
shuffle the originals before plac-
ing them in the document feed-
er.
❒
The guides must fit snugly
against both sides of the stack.
C
Adjust any print settings as nec-
essary, and then press the
{{{{
Start
}}}}
key.
D
Make your prints.
Note
❒
If the next original has been
placed in the document feeder
before the machine stops, that
original is fed automatically
and a trial print is delivered to
the paper delivery tray after the
print of the first original is com-
pleted. Check the image posi-
tion of the trial print of the next
original. If necessary, make
proof prints using the
{
Proof
}
key to check the image position
again.
ZDCH120E