Ricoh Priport JP8000 Operating Instructions Manual Download Page 204

Page: 204 / 464

Troubleshooting

184

When the Master Eject Indicator (

) Lights

The

Master Eject

indicator (

) lights

when it is time to empty the master
eject unit or when you need to set the
master eject unit.

Note

❒

Ink is readily removed from skin
by waterless hand cleaners fol-
lowed by washing with soap and
water.

❒

Be careful not to get any ink on
your clothing while emptying the
master eject unit.

Prepare the trash box.

Open the front door.

Grasp handle E1 and pull out the
master eject unit until it stops.

Pull up handle E2 and pull out the
master eject unit completely.

Grasp the master eject unit upper
handle and turn it clockwise with
one hand while holding handle
E1 with other hand (1).

Remove the used master by push-
ing down the master eject unit up-
per handle towards the trash box
(2).

Note

❒

If you cannot remove the used
masters completely, repeat step

until all the masters are re-

moved.

Reinstall the master eject unit un-
til it clicks in position.

Close the front cover.

E 1

E 2

Summary of Contents for Priport JP8000

















































































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands

Ricoh Priport JP8000, Operating Instructions Manual

Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands