Ricoh Priport JP8000 Operating Instructions Manual Download Page 339

Page: 339 / 464

Command Sheets for Make-Up Printing

• There is no limit to the number of areas you can designate on a single com-

mand sheet.

• If designated areas on two or more command sheets overlap, the last com-

mand sheet will apply to the overlapping portion.

• If you use Outline mode for letter images with a thickness of less than 3mm,

0.12", the print image might come out as expected.

Notes

The image might differ depending on how the designated area is drawn, so re-
member the following when making the command sheet.

Designated area

Area recognized

Preferred designated area

Part of the designated area is
surrounded by 3 sides of the en-
tire area.

Make a space of at least 2mm,
0.08", in front of the area surround-
ed by 3 sides (relative to the feed
direction).

1, 2 = 2mm, 0.08"

Double line pattern.

Only the outer line is
recognized.

Make a gap of at least 2mm, 0.08"
in width.

Summary of Contents for Priport JP8000

















































































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands

Ricoh Priport JP8000, Operating Instructions Manual

Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands