Ricoh Priport JP8000 Operating Instructions Manual Download Page 5

Page: 5 / 464

Safety Information

When using your equipment, the following safety precautions should always be
followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock, do not remove any covers or
screws other than those specified in this manual.

•

Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following conditions exists:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

Your equipment's cover has been damaged.

Summary of Contents for Priport JP8000

















































































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands

Ricoh Priport JP8000, Operating Instructions Manual

Search results

Summary of Contents for Priport JP8000

Reviews:

Related manuals for Priport JP8000

Brands by name

Popular brands