Ricoh Priport JP8000, Operating Instructions Manual

Page: 59 / 464

Erasing Center and Edge Margins
39
1
Erasing Center and Edge Margins
When printing from thick books, or
similar originals, the binding margin
at the center and the edges might ap-
pear on prints. To prevent this, per-
form the following steps.
Important
❒
Be sure to keep the platen cover at
an angle of at least 25 degrees with
the exposure glass.
❒
If you do not press hard on the
book while it is scanned, the mar-
gin at the center might no be
erased completely.
Note
❒
If your originals have solid images
at the edges, the machine might
recognize the solid images as shad-
ows and not copy them. In this
case, use Edge Erase mode so that
only the shadows are not copied.
⇒
P.40 “Edge Erase”
A
Set the book on the exposure
glass.
B
Keep the platen cover at an angle
of at least 25 degrees with the ex-
posure glass.
C
Press the
{{{{
Start
}}}}
key.
Note
❒
Press hard on the book with
your hand while it is scanned.
D
Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
[ Image
=
= =
=
]
key (
⇒
P.23 “Adjusting the
Position of Printed Images” ).
E
Make your prints.