Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 73

Page: 73 / 144

Colour Printing Using the Optional Colour Drum

Pull out the drum unit handle.

Note

❒

If you cannot pull out the drum
unit, push the drum unit han-
dle, then pull out the drum unit.

Hold the rail on the drum and
slide out the drum while pulling
the release towards you.

Remove the drum unit from the
machine while holding the upper
drum stay.

Note

❒

Be careful not to let the drum
unit fall.

Insert the colour drum unit along
the guide rail.

Slide in the drum unit until it
locks in position.

Lower the drum unit lock lever.

Close the front door.

Note

❒

Make sure that the

Cover Open

indicator (

) turns off, and the

COLOUR

is shown in the guid-

ance display.

TSLH01LE

TSLH01FE

TSLH01GE

TSLH01PE

TSLH01HE

TSLH027E

SilverV-gb.book Page 53 Monday, May 15, 2000 3:32 PM

Summary of Contents for PRIPORT JP1210

















































































































































Search results

Summary of Contents for PRIPORT JP1210

Reviews:

Ricoh PRIPORT JP1210, Operating Instructions Manual, Page: 73 / 144

Search results

Summary of Contents for PRIPORT JP1210

Reviews: