manualshive.com logo in svg

Ricoh PRIPORT JP1210, Operating Instructions Manual, Page: 132 / 144

Share
Download
Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 132

Remarks

112

6

Power Connection

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

❖

❖

❖

❖

Main Frame

• Make sure the plug is firmly inserted in the outlet.

Access to Machine

Place the machine near the power source, providing clearance as shown.

❖

❖

❖

❖

Main Frame

1.

More than 20 cm, 8.0"

2.

More than 60 cm, 23.7"

3.

More than 60 cm, 23.7"

4.

More than 60 cm, 23.7"

•

Only connect the machine to the power source described on the inside 
front cover of this manual. Connect the power cord directly into a wall 
outlet and do not use an extention cord.

•

Do not damage, break or make any modifications to the power cord. 
Do not place heavy objects on it. Do not pull it hard nor bend it more 
than necessary. These actions could cause an electric shock or fire.

•

Unplug the power cord from the wall outlet before you move the equipment. 
While moving the equipment, you should take care that the power cord will 
not be damaged under the equipment.

•

When you disconnect the power plug from the wall outlet, always pull the 
plug (not the cable).

1

3

2

4

GRINST0E

SilverV-gb.book  Page 112  Monday, May 15, 2000  3:32 PM

Summary of Contents for PRIPORT JP1210

















































































































































Reviews:

No comments