Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 3 | Manualshive

Page: 3 / 144

Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 3

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

Some illustrations might be slightly different from your machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual.

•

LG drum: Not Available

•

A4 drum: JP1210

•

B4 drum: JP1250

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good print quality, Ricoh recommends that you use genuine Ricoh master and ink.

Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.

Power Source

220 – 240V, 50/60Hz, 1.3A or more

Please be sure to connect the power cord to a power source as above. For details about power source,
see

⇒

P.112

“Power Connection”.

SilverV-gb.book Page 1 Monday, May 15, 2000 3:32 PM

«
1
2
3
4
5
...
»

Summary of Contents for PRIPORT JP1210

















































































































































Reviews:

No comments