Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 65

Page: 65 / 144

Printing Using the Optional 30 Originals Document Feeder

Setting Originals in the Document Feeder

Note

❒

If you set one original into the document feeder while another original is still
on the exposure glass, the original set into the document feeder will be
scanned first.

Adjust the guide to the original size.

Insert the aligned originals face up in the document feeder until they stop.

Limitation

❒

Approximately 30 originals (64g/m

, 17 lb) can be inserted at one time in

the 30 originals document feeder. The first (top) original will be fed first.

Note

❒

Do not insert different size originals at the same time.

❒

The guides must fit snugly against both sides of the stack.

TSLH011E

TSLH012E

SilverV-gb.book Page 45 Monday, May 15, 2000 3:32 PM

Summary of Contents for PRIPORT JP1210

















































































































































Search results

Summary of Contents for PRIPORT JP1210

Reviews:

Ricoh PRIPORT JP1210, Operating Instructions Manual, Page: 65 / 144

Search results

Summary of Contents for PRIPORT JP1210

Reviews: