Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 6 | Manualshive

Page: 6 / 144

Ricoh PRIPORT JP1210 Operating Instructions Manual Download Page 6

ii

R

CAUTION:

•

Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.

•

Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.

•

When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.

•

For environmental reasons, do not dispose of the equipment or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer or at appropriate collection sites.

•

Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.

SilverV-gb.book Page ii Monday, May 15, 2000 3:32 PM

«
...
4
5
6
7
8
...
»

Summary of Contents for PRIPORT JP1210

















































































































































Reviews:

No comments