Ricoh PRIPORT JP1210, Operating Instructions Manual, Page: 106 / 144

What to do If Something Goes Wrong
86
5
- - - -
To prevent original misfeeds:
• Originals heavier than 90g/m
2
, 23.9 lb (when setting a stack of originals)
• Originals lighter than 50g/m
2
, 13.3 lb (when setting a stack of originals)
• Originals heavier than 120g/m
2
, 31.9 lb (when setting one original at a time)
• Originals lighter than 40g/m
2
, 10.6 lb (when setting one original at a time)
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148mm
×
105mm, 5.8"
×
4.1"
• Originals larger than 257mm
×
364mm, 10.2"
×
14.4"
• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
Note
❒
If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the
{
Paste Shadow Erase
}
key. If the thickness of the paste-
up original is more than 0.1mm, and the space between the pasted parts is less
than 2mm, 0.08", a shadow might appear on the prints.
❒
The first 5mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5mm, 0.2".
❒
a: 5mm, 0.2"
❒
Do not mix different sizes of originals in the optional document feeder.
❒
Clean the separation roller if it is dirty. (A dirty separation roller might slip
and cause original misfeeds.)
❒
Remove staples or clips of originals. Fan originals that have had staples or
clips removed.
Original Print
a
SilverV-gb.book Page 86 Monday, May 15, 2000 3:32 PM