Ricoh PRIPORT JP1210, Operating Instructions Manual, Page: 49 / 144

Class Mode—Group Printing from the Same Original
29
1
E
Turn on the optional tape dis-
penser power switch.
F
Set one original face down on the
exposure glass or in the optional
document feeder.
G
Press the
{{{{
Start
}}}}
key.
H
Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
{
Image
Position
}
keys (see
⇒
P.9 “Shift-
ing the Print Image Position For-
ward or Backward”
) or the side
tray fine adjusting dial (see
⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left” ).
I
Make your prints.
Note
❒
After the last page of each print-
ing set is fed out to the paper de-
livery tray, the tape dispenser
drops a strip of paper on the top
of the paper stack.
❒
If the power switch of the op-
tional tape dispenser is turned
off or the tape dispenser is not
installed in your machine, the
group printing cycle stops after
each set is delivered. Remove
the set of prints from the paper
delivery tray and press the
{
Print
}
key to start the next
group printing cycle.
TSLP013E
On
Off
TSLS012E
TSLS014E
SilverV-gb.book Page 29 Monday, May 15, 2000 3:32 PM