Ricoh IPSiO PJ WX3230N, Owner'S Manual

Page: 159 / 206

159
Netw
ork/
USB memor
y
The control setting menu
This menu sets Projector name, Email function and PJLink function, etc. Select
Control
setting
in step 2 in “
Projector settings
”
p.152
. The following content will be displayed.
Item
Description
Projector
name
Specify a desired character string (0 to 16 characters).
[
or : Enter setting.] [ : Move left or right one character.] [ to
: Set a character.] [ : Confirm] [ : Select OK to end]
Press [
Cancel
] to return.
Email
[ : E-mail setting] [ : Select item]
Status notification: On Off
SMTP server: Enter a character string using numeric keys of the remote
control.
Port number:
Enter a character string using numeric keys of the remote
control.
Destination address:
Enter a character string using numeric keys of the
remote control.
Confirm: [OK Cancel]
PJLink
[ : PJLink setting] [ : Select item]
PJLink authentication: On Off
Password: Enter a character string (1 to 32 characters) using numeric keys of
the remote control.
Confirm: [OK Cancel]
Wireless
network
[ or : Enter setting.] [ : Select from Enabled, Disabled]
[ : Confirm] [ : Select
OK
to end]
Press [ Cancel ] to return.

Detailed description
[Projector name]
This can be used to identify projectors when communicating with multiple projectors, or
if there is a possibility that another person who is out of communication range will be
using the same projector. It is recommended this is set to prevent incorrect transmission.
[Email]
<Status notification>
: Sends alarm information to the specified E-mail address when
an error such as lamp failure occurs.
<SMTP server> : Set an IP address of the SMTP server.
<Port number>
: Enter a port number of the SMTP server.
<Destination address>
: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<
PJLink authentication
>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink -compliant Software Application. (Set [On]
or [Off].)
< Password >: Enter a password for confirmation when the above < PJLink
authentication > is set to [ On ].
■
•
•
•