Ricoh IPSiO PJ WX3230N, Owner'S Manual, Page: 155 / 206

155
Netw
ork/
USB memor
y

Details on individual items
[Wireless LAN settings]
<
Easy Connect (USB memory)
>
This feature allows users to easily connect the projector to a computer over a network,
without making
Wireless LAN settings
using
Network Utility
.
< Mode >
Your projector is set to Ad hoc in the factory. Change the setting if you want to use the
projector in Infrastructure mode.
<
SSID
>
This is an ID code for connecting to specific individuals over a wireless LAN. This may
also be called “
Network group
” or “
Network name
”. Please read the following carefully.
Note: When you use Ad hoc communication mode, if there is a similar SSID network
group (for example, RDPJ1, RDPJ2, etc.) in the possible communication area,
it is possible that your projector name will not be displayed in the
Network
Utility projector list column. If this is the case, set SSID to a completely different
character string.
Set the following items if you have set the communication mode to Infrastructure.
If you have set the communication mode to Ad hoc for Network Projector setting,
the following items should also be set.
<
DHCP
>
If you set
DHCP
to
Use
, the IP address of the projector is assigned automatically by the
DHCP server. If your network environment does not assign IP addresses automatically,
set
DHCP
to
Not use
, then set the following items
IP address
,
Subnet mask
and
Gateway
manually.
< IP address >
When DHCP is set to Not use , consult with your network administrator for the settings
below and set the IP address manually.
An IP address is a unique number assigned to a terminal. The format is a string of four
dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)
Note: If you set the same IP address for wireless LAN with the one for wired LAN,
network function may fail to operate properly.
< Subnet mask >
A subnet mask is used to determine what subnet the IP address assigned to a terminal
belongs to. (Example: 255.255.xxx.xxx)
Note: If you set the same subnet work for wireless LAN with the one for wired LAN,
network function may fail to operate properly.
< Gateway >
This value specifies the IP address of the device, such as a router, to be used to access
servers outside the network. (Example: 111.112.xxx.xxx)
•