123
Preparations
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [
Projection mode
] in the
Default setting 2
menu
p.145
, in accordance with your needs.
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
WARNING
Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS
when placing the unit.
Attempting to clean and replace the lamp in a high location
by yourself may cause you to fall, resulting in injury.
If you wish to mount the projector on the ceiling, be sure to ask your sales
representative before doing so.
Mounting the projector on a ceiling requires special
ceiling brackets (sold separately) and specialized knowledge. Improper mounting
could cause the projector to fall, possibly resulting in injury and damage, to the unit.
If the projector is ceiling-mounted, install the breaker for turning off the power in
case of anomaly.
Let everyone involved with the use of the projector know that fact.
•
•
•
Placement
Summary of Contents for IPSiO PJ WX3230N
Page 112: ......
Page 192: ...192 ...
