Ricoh IPSiO PJ WX3230N, Owner'S Manual

Page: 130 / 206

130
Basic operations
1
Turn on the power.
Turn on the power by following the instructions in “
Turn the power on
” p.128 .
2 Select the language and the lamp power during initial
startup.
When the projector is used for the first time after purchase, the start menu for
language selection, lamp power selection and configuration is displayed in Japanese. (If
the screen is out of focus, adjust it according to the step
6
.)
1
Use the , ,
or
button to select the desired language and
then press the button.
English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish Polish
Norwegian
Finnish
Czech
Hungarian
Greek
Danish
Dutch
Rumanian Japanese
Chinese (simplified)
Chinese (traditional)
Korean
Indonesian
Thai
Arabic
The message for setup confirmation is displayed in the selected language.
Then, the menu for lamp power selection and configuration is displayed. It is
automatically set as Standard. To change the setting, follow the step
2
.
2
Use the or button to select the lamp power and press the
button.
The lamp power, if selected, will be toggled without pressing the button. The display
automatically disappears in a few seconds.
Notes
When the projector is turned on the next time, the start menu will not appear upon
startup. However, if [
Reset all ] is executed from the Default setting 2 menu
p.145
,
the start menu will be displayed the next time the power is turned on.
The language can also be set via the
Display setting menu
p.141
and Lamp power
via the Default setting 1 menu
p.144
.
This owner’s manual assumes that English has been selected.
3
Activate the connected device.
Turn on and start the connected device such as a computer.
4 Press the INPUT button.
An image of the connected equipment is projected.
Each time you press the
INPUT button, it switches to the input of the connected
equipment that is outputting video signals.
•
•
•