Ricoh FW870, User Manual

Page: 98 / 206

3.1.2 Service Program Mode Table
1: A "*" before the mode number means that the mode can be accessed by
custormers or sales representative.
2: In the data colum, the default value is printed in bold letters. The default
settings for several items depend on the machine destination (refer to
page 4-26.).
Mode No. Function Data
*1
Fusing
Temperature 1
(Normal) Selects the fusing temperature for plain
paper. 1: Mode 1
2: Mode 2
3: Mode 3
4: Mode 4
5: Mode 5
6: Mode 6
7: Mode 7
8: Mode 8
9: Mode 9
10: Mode 10
11: Mode 11
12: Mode 12
*2
Fusing
Temperature 2
(High) Selects the fusing temperature for
translucent paper. 1: Mode 1
2: Mode 2
3: Mode 3
*3
Fusing
Temperature 3
(Low) Selects the fusing temperature for
translucent film. 1: Mode 1
2: Mode 2
*4
Copy Count
Up/Down Selects the copy count amount up or down. 0: Up
1: Down
*5
Beeper On/Off Selects if the beeper sounds or not. 0: On
1: Off
2: Only when the
edge margin or
paper length is
changed
continuously,
the beeper is off.
*6
Original Feed
Start Time Setting Selects the time when the original feed
roller starts rotating after the original set
sensor is actuated. 0: 2.5 seconds
1: 3 seconds
2: 4 seconds
3: 5 seconds
*7
Original Feed Out
Waiting Time
Setting Selects the time to when the original is
automatically fed out after it has been set
on the original table in manual feed mode. 0: 2 minutes
1: 1 minute
2: 3 minutes
3: 4 minutes
4: 5 minutes
5: No auto feed out
SERVICE TOOLS 25 July 1996
4-12