Ricoh FW870, User Manual

Page: 120 / 206

Mode No. Function Data
–64
Q/M Correction
Counter Displays the number of copies made after
the new developer initialization is done.
This value can be re input using +,- keys.
0
→
250
–65
Toner Supply
Mode Selection Selects the toner supply mode. Normally,
detect supply mode (setting 0) should be
used. If 1, 2, or 3 is selected and the main
switch is turned off and on, the wrench
mark blinks and the machine goes to fixed
supply mode. 0: Detect Supply
mode
1: Fixed Supply
mode (7.5%)
2: Fixed Supply
mode (15%)
3: Fixed Supply
mode (30%)
–66
Charge Wire
Cleaner Motor
Overcurrent
Detection Voltage
Setting Determines the charge wire cleaner motor
over current detection voltage.
1.0
←
1.5
→
2.0
1 step = 0.1 V
–70
Hot Roller Idling
Time Setting Determines the hot roller idling time after
the fusing temperature reaches the ready
condition. Even if the selected time has not
past, the fusing motor stops when the
pressure roller temperature reaches 130
°
C.
0: No idling
1: 30 seconds
2: 1 minute
3: 2 minutes
4: 3 minutes
–71
Pressure Roller
Temperature
Correction Start
Time Setting Determines the pressure roller temperature
correction start time. 0: 30 seconds after
the hot roller
stops rotation.
1: 20 seconds after
the hot roller stops
rotation.
2: 10 seconds after
the hot roller stops
rotation.
3: Soon after the hot
roller stops
rotation.
–72
Pressure Roller
Temperature
Correction Value
Setting 1 (Normal
Temperature
Mode) Determines the pressure roller temperature
correction value after the hot roller stops
rotation. The setting of this SP mode is
added to the standard correction value. -4: -20°C
-3: -15°C
-2: -10°C
-1: -5°C
0: 0
1: +5°C
2: +10°C
3: +15°C
4: +20°C
SERVICE TOOLS 25 July 1996
4-34