7.2 IMAGE PRODUCTION UNIT REMOVAL
CAUTION
Do not remove the image production unit before removing the roll feed
unit. Otherwise, the machine could topple over when pulling out the
roll feed unit.
1. Remove the roll feed unit (refer to the roll feed unit removal).
2. Remove the toner collection bottle [A] (1 connector) and toner collection
pipe [B].
3. Re-install the upper shipping retainers [C] (right and left: 2 screws each),
which were removed at the installation.
CAUTION
To lift up the image production unit, two persons or more must hold
the parts indicated by "*" in the illustration.
The lock plates [C] must be installed. Otherwise, the image production
unit could overbalance.
4. Remove the 6 screws [D] (right and left: 3 screws each).
5,. Lift up the image production unit [E] by gripping the parts indicated by
"
@
" (both right and left) and place the image production unit onto a flat
floor.
[B]
[A]
[C]
[E]
[D]
[D]
A174R553.wmf
ROLL FEEDER UNIT AND IMAGE PRODUCTION UNIT REMOVAL
25 July 1996
5-42
Summary of Contents for FW870
