Ricoh FW870, User Manual, Page: 85 / 206

3. Install the key counter bracket [A] (4 screws).
4. Pass the key counter holder harness [B] through the opening [C]in the
key counter bracket and install the key counter holder (2 screws).
Connect the key counter holder harness to the key counter harness [D].
5. Pass the key counter harness through the opening [E] in the copier right
side plate. Pass the the key counter harness through the clamps to the
main control board and connect it to CN110 [F] of the main control board.
6. Install the right lower cover [G] included with the key counter bracket set
(It is not necessary to use the used old right lower cover.). Re-install all
the parts instead of the old right lower cover.
7. Plug in the copier power cord and turn on the main switch.
Access SP No. 43 and input "1" (key counter installed).
[A]
[C]
[B] [D]
[F]
[G]
[E]
A174I526.wmf
KEY COUNTER HOLDER INSTALLATION 25 July 1996
3-24