Ricoh FW830, Service Manual

Page: 189 / 227

13. Open the exit guide unit [A].
14. Remove the left [B] and right [C] screws securing the exit guide unit.
15. Remove a ground screw [D].
16. Disconnect the two connectors [E].
17. Slide the exit guide unit to the left (rear view) and take it out from the
copier frame.
18. Loosen the screw [F] securing the tension sprocket [G] and remove the
paper exit drive chain [H].
19. Remove the two screws [I and J] securing the paper exit unit [K].
20. Remove a ground screw [L] and toothed washer [M].
[A]
[B]
[E]
[D]
[C]
[J]
[K]
[G]
[F]
[H]
[G]
[F]
[M]
[L]
[I]
31 December 1992 FUSING
5-49