Ricoh FW830, Service Manual

Page: 116 / 227

Mode No.
Function Data
No. Leading
Margin
Indicator
Trailing
Margin
Indicator
92 09 02 Cut Error Correction 3 – Synchro Cut
297 mm
Correct cut error for synchro cut 297 mm.
Input the number according to the decal on
the roll feeder right cover
(0.1 mm/step). 0 ~ 9
This SP mode must be done when the
roll feeder is installed.
93 09 03 Cut Error Correction 1 –Synchro Cut
1189 mm
Correct cut error for synchro cut 1189 mm.
Input "0" or "1" according to the decal stuck
on the roll feeder right cover.
0:
+
1:
–
This SP mode must be done when the
roll feeder is installed.
94 09 04 Cut Error Correction 2 –Synchro Cut
1189 mm
Correct cut error for synchro cut 1189 mm.
Input the number according to the decal on
the roll feeder right cover
(10 mm/step). 0 ~ 2
This SP mode must be done when the
roll feeder is installed.
95 09 05 Cut Error Correction 3 –Synchro Cut
1189 mm
Correct cut error for synchro cut 1189 mm.
Input the number according to the decal on
the roll feeder right cover
(1 mm/step). 0 ~ 9
This SP mode must be done when the
roll feeder is installed.
96 09 06 Fusing Lower Limit Temperature
Select 3 modes in case the fusing
temperature drops below the lower limit
temperature.
0: Normal
1: Forced Copy
2: Auto Start
SERVICE TOOLS 31 December 1992
4-30